Welcome: Shenzhen Gewei Technology Co,.Ltd

LC/SC/FC/ST/E2000/MTRJ Multimode Duplex OM1/OM2 Optic Patch Cord

LC/SC/FC/ST/E2000/MTRJ Multimode Duplex OM1/OM2 Optic Patch Cord

EMAIL

Fiber patch cables are the thin, flexible fibers of glass that carry data, telephone conversations and emails high speed all over the world in a matter of seconds with much less interference than copper patch lead. Fiber Optic cables need less amplification to boost signals so they travel better over longer distances.

The OM2 Fiber cable is a Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than OM1 62.5/125 fiber. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.

Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular OM1/OM2 multimode fiber, immune to electrical interference.

Product Specification

Connector TypeLC/SC/FC/ST/E2000/MTRJ
Fiber CountDuplexFiber ModeOM1 62.5/125μm or OM2 50/125μm
Wavelength850/1300nmCable ColorOrange Or Customized
Insertion Loss≤0.3dBReturn Loss≥30dB
Min. Bend Radius (Fiber Core)15mmMin. Bend Radius (Fiber Cable)20D/10D (Dynamic/Static)
Attenuation at 850nm3.0 dB/kmAttenuation at 1300nm1.0 dB/km
Cable JacketLSZH, PVC (OFNR), Plenum (OFNP)Cable Diameter1.6mm, 1.8mm, 2.0mm, 3.0mm
PolarityA(Tx) to B(Rx)Operating Temperature-20~70°C

Product Features

● Used to connect equipment that utilizes LC/SC/FC/ST/MTRJ/E2000 style connectors on each end and Manufactured from Multimode OM1/OM2 duplex fiber cable

● Connectors can choose a PC polish or UPC polish

● Each cable 100% tested for low insertion loss and Return loss

● Customized lengths, Cable Diameter and Cable colors available

● OFNR (PVC), Plenum(OFNP) and Low-Smoke, Zero Halogen(LSZH)

● Reduced Insertion Loss by up to 50%

● High Durability

● High Temperature Stability

● Good Exchangeability

● High Density design cuts down on installation costs

LC to LC Multimode Duplex OM1/OM2

LC UPC to LC UPC OM1 OM2 Multimode Duplex-1

LC UPC to LC UPC OM1 OM2 Multimode Duplex-2

LC to SC Multimode Duplex OM1/OM2

LC UPC to SC UPC OM1 OM2 Multimode Duplex-1

LC UPC to SC UPC OM1 OM2 Multimode Duplex-2

SC to SC Multimode Duplex OM1/OM2

SC UPC to SC UPC OM1 OM2 Multimode Duplex-1

SC UPC to SC UPC OM1 OM2 Multimode Duplex-2

SC to FC Multimode Duplex OM1/OM2

FC UPC to SC UPC OM1 OM2 Multimode Duplex-1

FC UPC to SC UPC OM1 OM2 Multimode Duplex-2

LC to FC Multimode Duplex OM1/OM2

LC UPC to FC UPC OM1 OM2 Multimode Duplex-1

LC UPC to FC UPC OM1 OM2 Multimode Duplex-2

SC to ST Multimode Duplex OM1/OM2

SC UPC to ST UPC OM1 OM2 Multimode Duplex-1

SC UPC to ST UPC OM1 OM2 Multimode Duplex-3

LC to ST Multimode Duplex OM1/OM2

LC UPC to ST UPC OM1 OM2 Multimode Duplex-1

LC UPC to ST UPC OM1 OM2 Multimode Duplex-3

ST to ST Multimode Duplex OM1/OM2

ST to ST OM1 OM2 Multimode Duplex-1

ST to ST OM1 OM2 Multimode Duplex-2

MTRJ Multimode Duplex OM1/OM2

MTRJ OM1 OM2 multimode duplex-1

MTRJ OM1 OM2 multimode duplex-2

E2000 Multimode Duplex OM1/OM2

E2000 to E2000 multimode

E2000 to E2000 multimode-2

Industry Standard Flammability Rating OFNR (Riser) Jacket Fiber Optic Cable

The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.

Zirconia Ceramic Ferrule Optimum IL and RL

Zirconia Ceramic Ferrule Optimum IL and RL

2.0mm Cable Boot, Provides Maximum Protection

2.0mm Cable Boot, Provides Maximum Protection

Printing helps clarify and recognize different cables

Printing helps clarify and recognize different cables

Smart & Reliable - Bendable Optical Fiber

The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.

Bend Insensitive Fiber

Bend Insensitive Fiber

BIF Cable can be stapled and bent around corners without sacrificing performance.

7.5mm Minimum Bend Radius

7.5mm Minimum Bend Radius

The bend performance improves duct utilization, enabling smaller enclosures.

Zirconia Ceramic Ferrule

Zirconia Ceramic Ferrule

Optimum IL and RL ensure stable signal transmission, protecting your network safety.

Various Choice to Meet Your Different Needs

1. Custom Connector

Custom Connector

2. Custom Cable Jacket

Custom Cable Jacket

3. Custom Cable Diameter

Custom Cable Diameter

OM1 VS OM2

● OM1 cable typically comes with an orange jacket and has a core size of 62.5 micrometers (µm). It can support 10 Gigabit Ethernet at lengths up 33 meters. It is most commonly used for 100 Megabit Ethernet applications.

● OM2 also has a suggested jacket color of orange. Its core size is 50µm instead of 62.5µm. It supports 10 Gigabit Ethernet at lengths up to 82 meters but is more commonly used for 1 Gigabit Ethernet applications.

Diameter: The core diameter of OM1 is 62.5 µm, The core diameter of OM2 is 50 µm

Jacket Color: OM1 and OM2 MMF are generally defined by an Orange jacket.

Optical Source: OM1 and OM2 commonly use LED light source.

Bandwidth: At 850 nm the minimal modal bandwidth of OM1 is 200MHz*km, of OM2 is 500MHz*km

How to choose the Multimode Fiber?

Multimode fibers are able to transmit different distance ranges at various data rate. You can choose the most suited one according to your actual application. The max multimode fiber distance comparison at different data rate is specified below.

Fiber Optic Cable TypeFiber Cable Distance

Fast Ethernet 100BA SE-FX1Gb Ethernet 1000BASE-SX1Gb Ethernet 1000BA SE-LX
Multimode fiberOM1200m275m550m (mode conditioning patch cable required)
OM2200m550m

Customized Connector Type: LC/SC/FC/ST/E2000/MTRJ

Customized Connector Type

LC connectors:

LC connectors

These connectors are ideal for use in high-density applications due to their small size and feature a pull-proof design. They are available in both simplex and duplex versions with a 1.25mm zirconia ferrule. Additionally LC connectors also make use of an specialized latch mechanism in order to provide stability within rack moum.

SC connectors: 

SC connectors

SC Connectors are non-optical disconnect connectors with a 2.5mm pre-radius-ed zirconia ferrule. They are ideal for quick patching of cables into rack or wall mounts due to their push-pull esign. Available in simplex and duplex with a reusable duplex holding clip to allow for duplex connections.

FC connectors: 

FC connectors

They feature a durable threaded coupling and are best suited for use within telecoms applicationsand make use of non-optical disconnect.

ST connectors: 

ST connectors

ST connectors or Straight Tip connectos make use of a semi-unique bayonet connection with a 2.5mm ferrule. ST’s are great fiber optic connectors for field installation due to their reliability and durability. They are available in both simplex and and duplex.

Performance Test

Performance Test

Production Pictures

Production Pictures

Factory Pictures

Factory Real Pictures


INQUIRY